2007 Dodge Pickup
Mileage
117,192
Service Date
9/25/2019
Services Performed
- CHECK AND ADVISE : FOUND CHECK ENGINE LIGHT ON / OIL PRESSURE WARNING LAMP COMES ON WHILE DRIVING P0462 – FUEL LEVEL SENSOR 1 CIRCUIT LOW P0521 – ENGINE OIL PRESSURE SENSOR PERFORMANCE P0406 – EGR POSITION SENSOR CIRCUIT HIGH *FOUND FUEL LEVEL SENSOR OPEN INTERMITTENTLY – RECOMMEND REPLACING FUEL PUMP ASSEMBLY *FOUND EGR POSITION SENSOR TO BE REPORTING THE INCORRECT PINTLE POSITION – RECOMMEND REPLACING EGR VALVE ASSEMBLY *FOUND NO OIL READING ON ENGINE OIL DIPSTICK – RECOMMEND STARTING WITH AN OIL CHANGE THEN DRIVING TO SEE IF OIL PRESSURE GAUGE CONTINUES TO DROP OUT.
- CHECK AND ADVISE : FRONT END BUMPER DAMAGE PRIOR TO SERVICE B PILLAR TRIM MISSING ON ARRIVAL ENGINE OIL NOT ON DIPSTICK ON ARRIVAL – OIL PRESSURE DROPS OUT ON TURNS AND DECELERATION – RECOMMEND STARTING WITH BG OIL CHANGE SERVICE COOLANT LEVEL 1/2 GALLON LOW – FOUND WATER PUMP LEAKING FUEL LEVEL SENSOR INTERMITTENTLY NOT REPORTING – RECOMMEND REPLACING FUEL PUMP ASSEMBLY EGR VALVE POSITION SENSOR NOT WORKING PROPERLY – RECOMMEND REPLACING EGR VALVE ASSEMBLY FRONT BRAKES AT 4MM REAR BRAKES AT 4MM TRANSMISSION PAN GASKET LEAKING EXHAUST MANIFOLD GASKETS LEAKING DUE TO BROKEN BOLTS IN CYLINDER HEAD. – RECOMMEND REPLACING EXHAUST MANIFOLD GASKETS / MACHINING MANIFOLDS / DRILLING OUT BROKEN BOLTS. BRAKE FLUSH DUE – MEASURES @ 3% CLIENT ADVISED – APPROVED CONDENSOR FAN, BG LOF, WATER PUMP
- CHECK AND ADVISE : SEE COMPLETE INSPECTION REPORT
- COMPLETED
- FRONT ______ REAR ______
- FRONT ___36___ REAR ___36___ SPARE ____36____
- INSTALL BG EPR, DRAIN OLD ENGINE OIL, INSTALL NEW FILTER AND UP TO 5 QUARTS NEW ENGINE OIL, INSTALL BG MOA OIL FORTIFIER, INSTALL BG 44K IN FUEL TANK, SET TIRE PRESSURE, PERFORM MAINTENANCE INSPECTION AND TOP OFF ALL FLUIDS
- Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. FRONT BRAKES AT 4MM REAR BRAKES AT 4MM BRAKES FEEL NORMAL
- RESTORES YOUR VEHICLES A/C TO IT'S MAXIMUM COOLING CAPACITY – INCLUDES – EVACUATE AND RECHARGE SYSTEM UP TO 2 LBS. OF R134A – VISUALLY INSPECT COMPRESSOR, CONDENSOR, EXPOSED HOSES, DRYER AND FILTER, EXPANSION DEVISE (IF POSSIBLE), FAN CLUTCH, COOLING FAN, CABIN FILTER (IF POSSIBLE), BELTS – INSPECT FOR LEAKS FOUND SYSTEM TO HAVE 1.49 LBS R-134A IN IT – SPEC IS 1.60 RAN SYSTEM AND FOUND CONDENSOR FAN NOT COMING ON. VERIFIED PROPER POWER AND GROUNDS TO FAN. FOUND INTERNAL FAN FAILURE. *RECOMMEND REPLACING CONDENSOR FAN ASSEMBLY
- ROTATE 4 TIRES
DAN M. gave our service a 5 star review on 9/26/2019
